Josh's Silencer Plan
For this Project you will need:
1) 1 foot long piece of PVC pipe 2 inches thick
2)Duct Tape
3)Foam or an old sweater something like that
4)A Dowel To attach gun to Silencer
Tools
1)Drill
2)(Maybe) A Clamp
Directions
Take PVC pipe and drill holes down the side in lines.(The More Holes The Better)
Then sand the out side of the pipe so its smooth.
Wrap the pipe in foam and use duct tape to hold it down in to place.
Put dowel on Barrel and Slide on Silencer.
